| Table of Contents |
|---|
...
Feature Summary
| Info |
|---|
Rebar Group Setting [단축명령 Shortcut command: RG] Delete Rebar Group Setting [단축명령 Shortcut command: DRG] The Rebar Group Setting 기능은 Group으로된 철근중 Group을 대표하는 철근만을 선택하여 표현하는 기능입니다. |
...
function is a function to select and express only the reinforcing bars representing the group among the grouped reinforcing bars. |
Function Explanation
Generate Drawing > Style > Rebar Group Setting
...
After executing the Rebar Group Setting 명령 실행 후 위 그림과 같은 순서로 철근 그룹을 대표할 철근을 설정합니다. 이 설정은 철근 Style의 Group Rebar Type 설정보다 우선적으로 적용됩니다.
...
command, set the rebar to represent the rebar group in the order shown in the figure above. This setting takes precedence over the Group Rebar Type setting of Rebar Style.
| Note |
|---|
Assuming that the group position of the reinforcing bar selected as a representative is the 10th, if the number of rebars becomes less than 10 through the model update, the settings are initialized. |
Generate Drawing > Style > Delete Rebar Group Setting
대표 철근 지정 설정을 삭제합니다Delete the representative rebar designation setting.
Object : 선택한 철근 객체의 설정만을 삭제합니다Deletes only the settings of the selected reinforcing bar object.
View : 선택한 View에 속하는 모든 철근 객체의 대표철근 설정을 삭제합니다. All : 현재 작업 공간상(상단 Tap기준)에 모든 철근 객체의 대표철근 설정을 삭제합니다Deletes the representative reinforcing bar settings of all reinforcing bar objects belonging to the selected view.
All : Deletes the representative reinforcing bar settings of all reinforcing bar objects in the current work space (based on the upper tap).